Table of Contents
HOW TO PICK THE BEST SARMS STACK
SARMs or Selective Androgen Receptor Modulators are known to be a safer alternative to AAS and Prohormones. These compounds, as the name suggests, are extremely selective, interacting with just the right androgen receptors to deliver the necessary results. Although their selective nature has made them great in so many ways, it is also one of the reasons why the compounds are not as aggressive as your traditional steroids and prohormones. This may be good news to you if you are just starting your bodybuilding journey, but for an advanced fitness enthusiast, a single mild SARM may not be enough. Also, you may be rushing against time as you could be preparing for a competition or something and hence you are really desperate to cut that extra layer of fat or add some muscle mass quickly before the deadlines. In such a situation, powerful SARMs like say LGD-4033 may get the job done alright, but if you want even better results, then you stand a better chance stacking it with another SARM.
Personally, I wouldn’t recommend any beginners to go straight into stacking several SARMs before they’ve even given one compound a shot. A lot of things can go wrong here. I’d advise beginners to first run a cycle or two with certain SARMs before they can start exploring the possibility of stacking them. But that said, we also have several friendly stacks that can work pretty well with some relatively new bodybuilders. However, to keep you safe, the doses for these beginner stacks should remain low. Unless you’ve demonstrated decent tolerance to these stacks, there is really no reason to up them at all. Remember, no lean mass is ever worth your health and life.
If you know anything about SAMRs then you know that they are not all equal. This is not just in terms of potency but also on their function in the body. All SARMs are helpful in bodybuilding in one way or another, but each one of them is better suited for a particular task than the other. For instance, a SARM such as Ligandrol (LGD-4033) is more effective in a bulking cycle while Cardarine (GW-501516) proves to be one of the best-cutting SARMs around (although it's technically more of a PPAR agonist than a SARM). Therefore, this review is broken down into different stacks, depending on the results you are looking for. You should be able to find everything you need to know for the specific cycle that you are hoping to run.
What’s The Best Sarms Stack for Bulking?
The best SARM for bulking is Ligandrol or LGD-4033. There is no debating that. If you are looking to gain even more insane lean mass, the best stack would involve LGD-4033 and MK -677. This is a classic bulking stack that has proven to be very effective among many bodybuilders.
So, how would a typical LGD-4033 and MK-677 stack look like? For the best results, you need to run this stack for six weeks. You will still witness impressive results at five weeks but at no point should you ever contemplate going beyond the 6-weeks mark. Anything more than that is outright dangerous and just not worth it.
What about the doses? Well, both beginners and advanced bodybuilders should start small. We are talking around 5mg and 12.5mg of LGD-4033 and MK-677 respectively. Run this for the first week after which you can up the dosage to 10mg and 25 mg of LGD-4033 and MK-677 respectively and maintain the dosage there for the rest of the cycle if you are not experiencing any undesirable effects.
While LGD-4033 and MK-677 is the most popular bulking stack, it is not the only one. Some people are also known to replace MK-677 with RAD-140, and they still get the results they need. Alternatively, you can run a stack of YK-11 – a very impressive Myostatin inhibitor – with RAD-140, and you’ll bulk up pretty good. This is a very decent option, particularly among people who don’t react well to LGD-4033.
For the most advanced bodybuilders; you can stack LGD-4033 with MK-677 and YK-11. This is an insane bulking stack that you really shouldn’t come anywhere close to it if you don’t have the right track record. In this stack, you use 5mg of LGD-4033, 5mg of YK-11, and 25mg of MK-677 for eight weeks.
PCT is crucial after every SARMs stack cycle, and this one is no different. It doesn’t matter how well you’ve always responded to SARMs, but when you decide to stack more than one, you must go through therapy to make sure that natural hormone levels are within the recommended levels.
What’s The Best Sarms Stack for Cutting?
Cardarine is one of the best cutting compounds around. It is usually categorized and sold as a Selective Androgen Receptor Modulator, but it is actually a PPAR agonist. As a PPAR agonist, this compound stimulates your body to consume energy not from the muscles but rather from the fat deposits in the body. In the end, the compound promotes excellent fat burning even when the body is resting. As such, it is rather obvious that the compound has to feature in the best cutting cycle.
The most effective cutting stack involves Cardarine and Andarine. These compounds work superbly to improve muscle definition by removing all the extra adipose in the body. Needless to say that all this is achieved while making sure that no muscle mass is lost in the process. This is vital because in cutting cycles, it is common for the body to start eating away muscle tissue since it is in a calorie deficit state. The presence of both S4 and GW-501516 helps to keep the muscles safe while the fat is getting shredded off. In this cycle, you should use 30mg of GW-501516 and 50mg of S4 for eight weeks. You should start with just half of the dosages in the first week, though.
Another alternative cutting stack involves Cardarine and Ostarine. You can start with around 10mg to 15mg of each in the first week and then increase the dose to 20mg or 30mg for the next five weeks. A 6-week cycle of Cardarine and Ostarine has always done the trick, and hence you won’t need to go anywhere beyond that.
What’s The Best Sarms Stack for Recomposition?
SARMs are so versatile that you can actually use them to cut body fat all while you are also putting up some muscle mass. This stack is vital, especially among bodybuilders who are getting ready for a competition.
You can get excellent recomposition results by stacking Ligandrol with Cardarine. While Ligandrol is doing most of the work in building your muscles, Cardarine will make sure that fat is getting shredded to pave the way for fresh and strong muscles. You can start at a dosage of 5mg for each in the first three weeks and then increase it to 10mg each for the final three weeks.
You can take recomposition to a new level by stacking LGD-4033 with GW-501516 and MK-677. This crazy stack is not for the faint-hearted. Even advanced bodybuilders struggle with it sometimes. To that end, it is imperative that you start with 5mg of LGD-4033 and 10mg of both MK-677 and GW-501516 in the first three weeks and then increase each SARM by 5mg for the next three weeks.
Alternatively, you can stack Ostarine, Cardarine, and Andarine at 20mg each for eight weeks. This will also deliver the results you are looking for, although it might not be as powerful as the other stack.
What’s The Best Sarms Stack for Strength?
We also have something for everyone who is after unrivaled strength. By stacking LGD-4033 with YK-11, you are not just setting yourself up for unreal muscle gains, but you are also going to witness crazy energy and strength levels that’ll see you own everyone in the gym. In this stack, you should start with 10mg of both LGD-4033 and YK-11 for the first two weeks and then increase the LGD-4033 dose to 20mg for the next four weeks. It works like a charm.
To avoid struggling with recovery, you can also add MK-677 in the cycle. For this triple stack, you can use just 10mg of both LGD-4033 and YK-11 and 12.5mg of Mk-677 in the first week. You should then increase the dose for LGD-4033 to 20mg and that of MK-677 to 25mg while keeping the YK-11 dosage at 10mg and run the cycle for the next seven weeks.
Bottom Line
The above review is as comprehensive as it gets. Whether your goal is to bulk, cut, or recompose; I’m confident that you’re now in a position to get the right stack that will finally give you the results you are looking for. Remember that you can always reduce the doses or cut short the cycle should you experience any unbearable adverse reactions. Also, avoid going beyond the set guidelines and make sure that you always run PCT before starting another cycle.
